We are currently importing KN95 / KF94 / Dental mask production machine from China according to the tremendous demand of mask affecting from the Corona19. This machine is made in China but recently many Chinese mask factories tend to be decreased by saturation of mask manufacturing system in China. Thus, some factories which produce mask production machines, suddenly got a lot of stocks both dental and KN95 production lines. Consequently, the actual price of machines has been decreased a lot.
The N95 mask machine automatic production line is a fully automated machine for producing N95 and KN95 masks. This automatic production line is mainly composed of a coil material feeding machine, a nose bridge forming machine, a labeling ear belt machine and a forming discharge machine. The coil feeder can supply a variety of non-woven fabrics. The mask usually contains an inner layer of ordinary non-woven fabric, a middle layer of polypropylene melt-blown non-woven fabric, and an outer layer of water-repellent non-woven fabric. This automatic production line can be used for raw material roll feeding from mask production, body production, label printing, welding with double ear straps, folding, forming, until the finished product discharge of N95 masks is fully automated, controlled by an advanced intelligent programmable control system. No manual operation is required to achieve fully automated production
Hardware specifications
- Equipment size : 9000x1000x2000
- Equipment appearance : Main panel color computer white, rack aluminum profile
- equipment weight : ≤2.0T (Adjust according to the actual situation)
Device parameters
- Supply and demand power :
1) Three-phase 380V & single-phase 220V 50Hz/60Hz (13kw)
2) There is a 2m long wire outside the device, which is led out from the lower right corner
of the back of the device for external power supply
Gas specification
- Working air pressure: 0.5MPa~0.7MPa
- Air consumption: 75L/Min
- Tracheal diameter: ∅12mm
- There is a 2m long ∅12mm trachea outside the equipment, and a quick connector is connected to the end of the trachea to connect with the factory gas source
Ultrasound system : 15/20KHz
(20khz intermittent wave two welding earbands, two frequent waves are used for nose bridge and breathing valve welding 15khz intermittent wave is used for the final Molding)
Safety function
- alarm system : vacuum/CDA/Speed and other abnormal detection with display
- emergency stop : placed in an important place of the equipment
- Security measures : there is a guarantee for high temperature or potential safety hazards
Cover or warning signs
- frame : Frame ground resistance <5Ω
We provide relevant documents as below,
Document :
1) A copy of the operating instructions
2) Circuit maintenance diagram
3) Air circuit diagram
4) A copy of the touch screen manual
Training content
1) Installation and adjustment of equipment
2) Equipment operation
3) Equipment adjustment and parameter setting
4) Equipment maintenance
5) Common equipment failures
6) Replacement of wearing parts of equipment
After-sales service
Installation and commissioning and personnel training services after the equipment arrives at the factory
※ The stock number is getting decreased, so should try to contact us as soon as possible.
Comments